• A large adjustable submersible eyeball fitting manufactured from stainless steel with a clear focusing lens. Available with a back nut for fixing through a panel or a back box for fitting into CP2 pool pipe for more accurate and easier installation. Suitable for installation in constant immersion settings such as swimming pools, ponds and water features.
  • A small, adjustable, submersible eyeball fitting manufactured from stainless steel with a clear focusing lens. Available with a back nut for fixing through a panel or a back box for fitting into pool pipe for more accurate and easier installation. Suitable for installation in constant immersion settings such as swimming pools, ponds and water features.
  • A large submersible eyeball fitting which is manufactured from stainless steel and incorporates a clear focusing lens. The E3 is suitable for installation in Certiken 2" ABS pool pipe with an internal diameter of 53mm. Unlike the UFO E1 & E2 fittings, the E3 does not require a separate back box. A water resistant bung is also available for fitting in the opposite end of the pool pipe to provide extra protection against water ingress.
  • A large submersible eyeball fitting manufactured from stainless steel with a front mounted flat lens and a rear focusable and adjustable eyeball. Suitable for fitting into CP2 pool pipe for more accurate and easier installation. Can be installed in constant immersion settings such as swimming pools, ponds and water features.
  • A stainless steel paver end fitting with clear glass window. Has a threaded back for simple fixing through a mounting surface. The P17T fitting is popular in spa pools and baths where the nut can be used to fix it through the typically thin surface of either. Whilst this fitting is can be used in constant immersion conditions, it is not suitable for installation where it will be under significant pressure.
  • A small stainless steel paver end fitting with clear glass window and rear gland. Suitable for use with sheathed PMMA fiber between 1.5mm (0.06") and 2mm (0.08") active diameter. Comes fitted with a nickel plated brass gland to allow for connection to the fiber and to prevent moisture ingress below the lens. The P4G is suitable for use in swimming pool floors and other wet areas to give a starfield like effect. Can also be used on pathways and other paved areas to give a similar effect.